Electrohydraulic dock leveler with telescopic lip of DSI series

   Electrohydraulic dock levelers with telescopic lip of DSI series are the most effective solution for accessing the load from the warehouse to the truck during loading and unloading operations. These levelers are used when a precise lip positioning is needed to the vehicle body, such as the lateral load, as well as the minimum distance between the edge of the vehicle body and the load located inside it. The segments of the lip, allow operation with vehicles whose width is narrower than the width of the leveler. Operation principle is that when activated, the leveler is lifted and the lip is pushed, then the platform is lowered until the lip reaches the floor of the vehicle. After the completion of loading and unloading the leveler is raised again, the lip retracts, the platform returns to its original position. Adjustment is performed by suspended or embedded installation type.


 

  Main advantages:

•  the length of the lip is 500/1000 mm;

•  when working with truck that has a skew, the side tilt is possibile to 100 mm;

•  due to yellow-black signal strip, one can see that the platform is above the level of the ramp;

•  the surface of the platform is made of lentil sheet to provide a better adhesion of the forklift wheel;

•  provides safe transverse movement on the leveler;

•  safety system instantly stops the hydraulic leveler in the case of hose breakage or unauthorized departure of the vehicle during operations;

•  locking mechanism ensures a safe leveler maintenance and repair


 

Dimensions and specifications

 Length  2000 / 2500 / 3000 / 3500 / 4500 mm
 Width  1800 / 2000
 Operating range
 • up
 • down
 0 - 550 mm
 0 - 350 mm
 Thickness of the top sheet on the platform cover
 • standard
 • on request
 6 / (0.6 - 1.8 )*mm
 8 / (0.8 - 2.4 )*mm
 Colour**  Black (RAL 9005)
 Number of lift cylinders
 • standard
 • on request
 1 pc
 2 pcs

  * In the brackets is the height of the embossing. 

 ** Powder painting, pre-treated in shot blasting chamber. 


 

  Technical specifications

 Maximum load  6000 kg (60 kN) / 10000 kg (100 kN)
 Maximum point load
 • top sheet 10 mm
 • top sheet 8 mm
 6.5 N/mm²
 1.3 N/mm²
 Electric pump power  1.1 kWt
 Supply Voltage  380 V 3 phase
 Tension control  24 B
 Degree on protection  IP54
 Operating oil  Mobil HVI
 Class of surface cleaning before painting  Sa 2
 Thickness of the painted layer  60 - 90 mkm
 Temperature range  from -30 to +50°C

 


   Dimentions

 Height, mm  2000  2500  3000  3500  4000
 Weight, kg  870  1000  1100  1200  1350
Visitors: 560,120